Epson printers Error codes and solutions

Error code
Problem and solution

I-01
Paper is out or multiple pages have fed. Load or reload paper in the sheet feeder, then press Start to continue.

W-05
W-02

Paper is jammed. Carefully remove the jam.

W-03
W-04

The cartridge cover is open. Close the cartridge cover and press Start.

W-10
An ink cartridge is expended or incorrectly installed.
If an ink cartridge is expended, you must replace the cartridge.
If you just replaced a cartridge and the error code still appears, the cartridge is not installed correctly. Press Start to move the cartridges to the replacement position. Press down on all the installed cartridges, then press Start to continue.

W-11
W-13
W-41
W-12

Cannot recognize the ink cartridge(s) shown on the LCD screen. Replace the ink cartridge(s).

I-11
No memory card is inserted. Insert a memory card.

W-30
The inserted memory card is not installed correctly, not supported, or does not contain compatible photos. Remove it and check the card or insert another card.

W-31
I-50

The index sheet has not been placed on the scanner glass or is not positioned correctly. Check the marks on the sheet, position it correctly, and try printing again.

I-51
No photos are selected on the index sheet, the paper type is not selected on the index sheet, or the corresponding ovals are not marked correctly on the index sheet. Check the marks on the sheet, position it correctly, and try printing again.

I-52
I-53

The index sheet you’re printing from does not match the photos on the inserted memory card. Replace the card or sheet and try again.

W-01
Parts inside your Epson printer are near or at the end of their service life. Contact Epson for help.

E-10
E-02

There is a problem with your Epson printer. Turn it off, wait a few moments, and turn it back on again. If the error is not resolved, contact Epson for help.

E-01
Turn your Epson printer off, make sure no paper is jammed inside, and turn it back on. If the error is not resolved, contact Epson for help.

Both comments and pings are currently closed.

Comments are closed.